How Much Do Custom Shower Screens Cost in Brisbane?

The Short Answer

In Brisbane right now, most homeowners can expect to pay somewhere around $1,000 to $1,600 for a semi-frameless screen and $1,600 to $2,500+ for a frameless screen, supplied and installed. Basic framed screens can come in cheaper, while large walk-ins, fluted glass and designer hardware can push the price well past $3,000.

Of course, “it depends” is the honest answer, and that’s exactly what nobody wants to hear when they’re trying to lock in a reno budget. So in this guide, we’ll unpack what you’re actually paying for, why two quotes for the “same” screen can be hundreds of dollars apart, and how to get the best bang for your buck.

Whether you’re doing up a tired ensuite in Ashgrove, fitting out a new build in North Lakes, or sprucing up an investment unit in Woolloongabba, this is your no-nonsense guide to pricing Custom Shower Screens in Brisbane.

Typical Price Ranges in Brisbane (2026)

Here’s a rough guide based on published pricing from South East Queensland suppliers. These are ballpark figures for supply and install on a standard recess of around 900 × 900mm, so treat them as a starting point rather than a quote.

As a rule of thumb, frameless tends to cost $500 to $1,000 more than a comparable semi-frameless setup, according to one Queensland manufacturer’s 2026 guide. That’s why semi-frameless remains the most popular pick across Brisbane’s general residential market.

What Drives the Price Up (or Down)?

Two showers might look similar in photos, but the final number comes down to a handful of key factors.

1. Screen style. This is the big one. Frameless screens need thicker 10mm glass and heavier-duty hardware because there’s no frame to carry the load. Semi-frameless uses thinner 6mm glass with a slim aluminium frame doing some of the structural work, which keeps costs down.
2. Size and configuration. A simple front-only screen is at the budget end. A front-and-return or corner setup costs more, and wall-to-wall or angled configurations sit higher again. Bigger openings mean more glass, more hardware and more labour.
3. Glass type. Clear toughened glass is the standard. Upgrades like low-iron glass (which removes that slight green tinge), frosted, tinted or fluted glass all add to the bill. Fluted glass is very much on trend right now, but it can add several hundred dollars to a frameless screen.
4. Hardware and frame finish. Chrome and polished silver are usually the baseline. Matte black is hugely popular across South East Queensland at the moment, and it typically adds around $80 to $200 per screen. Brushed gold, gunmetal and brass finishes can sit higher still.
5. Your bathroom’s quirks. This is where a lot of Brisbane homes get caught out. Older Queenslanders and post-war places often have walls that are a bit out of square after decades of settling. Custom cutting, extra packing or special brackets to deal with uneven walls or floors can add to the cost. Tricky access, like a second-storey bathroom up a narrow staircase, can too.
6. Supply-only vs supply and install. You’ll see screens online for a few hundred bucks, but they’re usually standard-size, supply-only units. Once you add a tradie’s time, removal of the old screen and any fiddling to make it fit, the gap to a proper custom job often shrinks, or disappears altogether.

Hidden Costs to Watch For

The price on the quote isn’t always the whole story. Before you sign, check whether these are included:

• Removal and disposal of the old screen. Some suppliers include it, others charge extra.
• Tile repairs. Old brackets and silicone can chip or lift tiles when they come out. Tiling work is usually a separate trade and cost.
• Protective glass coating. A nano-coating that helps water bead off typically adds around $180 to $250, but it can save you plenty of scrubbing.
• Travel or access fees. For outer suburbs or hard-to-reach bathrooms.
• Always confirm whether the price you’ve been given includes it.
• Plumbing or shower base changes. Moving taps, replacing a base or fixing waterproofing sits outside a screen installer’s scope and needs budgeting separately.

Smart Ways to Save Without Cutting Corners

Want a quality screen without blowing the budget? Here are a few tricks that won’t compromise safety or quality:

• Go semi-frameless. You’ll get most of the modern look for noticeably less, plus better water containment.
• Stick with clear glass and standard finishes. Chrome or polished silver hardware and clear glass keep costs lean.
• Choose a simple configuration. If your layout allows, a front-only screen or a single fixed panel is often the cheapest way to get a sleek finish.
• Be flexible on sizing. Some suppliers can use stock-size panels if your opening allows, which can trim the price.
• Bundle it into your wider reno. Coordinating the screen with your tiler and plumber avoids return visits and rework.
• Get multiple measured quotes. Online estimators are handy for a ballpark, but an on-site measure gives you a real, fixed price.

What you shouldn’t skimp on is the glass itself. All shower screen glass in Australia must be Grade A toughened safety glass complying with AS 1288 and AS 2208. A suspiciously cheap quote can sometimes mean corners are being cut on compliance or installation.

How to Choose the Right Supplier

The cheapest quote isn’t always the best value. When comparing suppliers of Custom Shower Screens Brisbane homeowners can rely on, ask these questions:

1. Are you QBCC licensed? In Queensland, fabricating and installing shower screens falls under the Glass, Glazing and Aluminium licence class. You can check any licence on the QBCC register.
2. Is the quote supply and install, and fixed? A fixed quote after an on-site measure means no nasty surprises on install day.
3. What’s included? Check for removal, disposal, silicone sealing, coatings and GST.
4. What warranty do you offer? Look for cover on both the product and the workmanship, including moving parts like hinges and rollers.
5. Who does the install? Suppliers who use their own team, rather than a string of subcontractors, tend to own the result.
6. Can I see your work? Photos of past jobs and local reviews are worth their weight in gold.

The Final Word

So, how much do custom shower screens cost in Brisbane? For most homes, you’re looking at roughly $1,000 to $1,600 for semi-frameless and $1,600 to $2,500+ for frameless, supplied and installed, with your final price shaped by size, glass, hardware and the quirks of your bathroom.

Semi-frameless is the sweet spot for value and practicality, while frameless is worth the extra if you’re after a showstopper finish. Either way, the smartest move is to book a free measure and get a fixed quote, so you know exactly what you’re up for before the old screen comes out.

Ready to get the ball rolling? Reach out to a trusted local team specialising in Custom Shower Screens Brisbane, get a few quotes, and you’ll be well on your way to a bathroom that looks a million bucks, without costing it.

Prices quoted are indicative only, based on publicly available 2025–2026 pricing from South East Queensland suppliers. Always get a measured quote for your bathroom.